▪New line of magnetic sensors MTS with small dimensions.

▪Resolutions up to 0.5 microns programmable (Pr) via serial interface. DPI resolution and inch readings are immediately available.

▪Many pole pitches available.

▪Big alignment tolerances and sensor / magnetic tape distance up to 13 mm, for even easier and faster installation.

▪Reference indexes in required positions (with magnetic tapes MP200Z, MP500Z and MP625Z).

▪Magnetic sensor body made of die-cast material.

▪Fixing the magnetic sensor through the existing threaded holes M3 or M4 screws.

▪Protection against reversal of power supply polarity and short circuits at the output ports.


TypePole pitchAvailable resolutionsAccuracySensor - magnetic band gapReference indexesRepeatabilityOutput signalsPower supplyMax. frequencyMax. traversing speedProtection classDatenblatt
MTS P1+1 mm10 - 5 - 1 - 0.5 μm± 6 µm0.1 ÷ 0.4 mm (with band MP100)C = at constant pitch (1 mm)± 1 incrementLINE DRIVER / PUSH-PULL5 ÷ 28 Vdc ± 5%300 kHz (up to 500 kHz on request)up to 6 m/sIP 67download PDF
MTS M2+2 mm1,000 - 500 - 100 - 50 - 25 - 10 - 5 - 1 μmup to ± 8 µm0.2 ÷ 1.4 mm (with band MP200)
0.3 ÷ 0.8 mm (with band MP200Z)
C = at constant pitch (2 mm)
E = external
Z = positioned on the magnetic band
± 1 incrementLINE DRIVER / PUSH-PULL5 ÷ 28 Vdc ± 5%300 kHz (up to 500 kHz on request)up to 12 m/sIP 67download PDF
MTS I2.54+2.54 mm 600 - 1,200 - 2,400 - 3,000 - 4,800 - 6,000 - 9,600 - 12,000 -
24,000 DPI
up to ± 10 µm0.2 ÷ 1.4 mm (with band MP254)C = at constant pitch (2.54 mm)± 1 incrementLINE DRIVER / PUSH-PULL5 ÷ 28 Vdc ± 5%300 kHz (up to 500 kHz on request)up to 14 m/sIP 67download PDF
MTS H5+5 mm250 - 100 - 50 - 25 - 10 - 5 - 1 μmup to ± 30 µm0.3 ÷ 4 mm (with band MP500)
0.35 ÷ 2 mm (with band MP500Z)
C = at constant pitch (5 mm)
E = external
Z = positioned on the magnetic band
± 1 incrementLINE DRIVER / PUSH-PULL5 ÷ 28 Vdc ± 5%300 kHz (up to 500 kHz on request)up to 30 m/sIP 67download PDF
MTS S6.25+6.25 mm500 - 100 - 50 - 25 - 10 - 5 μmup to ± 40 µm 1 ÷ 6 mm (with band MP625)
1 ÷ 2 mm (with band MP625Z)
C = at constant pitch
E = external
Z = positioned on the magnetic band
± 1 incrementLINE DRIVER / PUSH-PULL5 ÷ 28 Vdc ± 5%300 kHz (up to 500 kHz on request)up to 30 m/sIP 67download PDF
MTS E10+10 mm500 - 100 μm± 400 µm3 ÷ 9 mm (with band MP1000)C = at constant pitch (10 mm)
E = external
± 1 incrementLINE DRIVER / PUSH-PULL5 ÷ 28 Vdc ± 5%300 kHz (up to 500 kHz on request)up to 30 m/sIP 67download PDF
MTS C20+20 mm5,000 - 1,000 - 500 - 100 μm± 500 µm7 ÷ 12 mm (with band MP2000)C = at constant pitch (20 mm)
E = external
± 1 incrementLINE DRIVER / PUSH-PULL5 ÷ 28 Vdc ± 5%300 kHz (up to 500 kHz on request)up to 30 m/sIP 67download PDF