▪Optical length measuring system with stainless steel grille specifically for synchronized press brakes.

▪The self-aligning read transducer resolution up to 0.5 microns, accuracy ± 2.5 microns.

▪Linear thermal expansion of λ = 10.6 x 10-6 ° C-1.

▪Maximum reliability and speed of the freely selectable reference marks.

▪Laserkalibrierter hybrid circuit for absolute signal stability.

▪Built-in protection against overvoltage and short circuits, as well as to reverse the polarity of the voltage supply.


TypeResolutionGrating pitch
Accuracy grade
Max. traversing speed
Measuring lengthReference indexes
Output signals
Protection class
Datenblatt
PBS-HR 100Z
10 µm
40 µm
± 2.5 µm
80 m/min
170, 220, 270, 320, … mmin required positionsLINE DRIVER / PUSH-PULLIP 54 standard IP 64 pressurized
download PDF
PBS-HR T55 µm20 µm
± 2.5 µm
60 m/min
170, 220, 270, 320, … mmin required positionsLINE DRIVER / PUSH-PULLIP 54standard IP 64 pressurized
download PDF
PBS-HR 5Z5 µm
20 µm
± 2.5 µm
60 m/min
170, 220, 270, 320, … mmin required positionsLINE DRIVER / PUSH-PULLIP 54 standard IP 64 pressurized
download PDF
PBS-HR T1
1 µm
20 µm
± 2.5 µm
40 m/min
170, 220, 270, 320, … mmin required positionsLINE DRIVER / PUSH-PULL
IP 54 standard IP 64 pressurized
download PDF
PBS-HR W1Z
1 µm
40 µm
± 2.5 µm
25 m/min
170, 220, 270, 320, … mmin required positionsLINE DRIVER / PUSH-PULLIP 54 standard IP 64 pressurized
download PDF
PBS-HR T050.5 µm20 µm± 2.5 µm25 m/min170, 220, 270, 320, … mmin required positionsLINE DRIVER / PUSH-PULLIP 54 standard IP 64 pressurized
download PDF